“Analysis of Nitrogen Stimulation Technique in Shallow CBM Formations”, Paper SPE 135683, presented at the 2010 Annual Technical Conference and Exhibition held in Florence, Italy, 19–22 September, 2010 (A. Settari, R.C. Bachman and P. Bothwell).

“Modeling shear dominated hydraulic fracturing as a coupled fluid-solid interaction”, Paper 131736-PP, presented at the CPS/SPE International Oil & Gas Conference and Exhibition in China held in Beijing, China, 8–10 June 2010 (M. Nassir, A. Settari and R. Wan).

Thermal Aspects of Geomechanics and Induced Fracturing in CO₂ Injection With Application to CO₂ Sequestration in Ohio River Valley, Paper SPE 139706,  SPE International Conference on CO₂ Capture, Storage, and Utilization held in New Orleans, Louisiana, USA, 10–12 November 2010 (S. Goodarzi, A. Settari, M. Zoback and D. W. Keith).

“A Novel Hydraulic Fracturing Model Fully Coupled with Geomechanics and Reservoir Simulator”, SPE Journal, Vol. 14, No. 3, Sept. 2009, pp. 423-430 (L. Ji, A. Settari and R.B. Sullivan).

“New solution for anisotropic formation damage due to produced water re-injection”, J. Can. Petrol. Technol., Vol. 48, No. 4,  April 2009, pp. 57-63 (R. Salehi Mojarad and A. Settari).

Comprehensive coupled modeling analysis of stimulations and post-frac productivity – case study of the Wyoming field, Paper SPE 119394, presented at the 2009 SPE Hydraulic Fracturing Technology Conference held in The Woodlands, Texas, USA, 19–21, January 2009 (A. Settari, R.B. Sullivan, G. Turk, J. Rueda, R. Rother  and T. Skinner).

“Coupled Simulation of Reservoir Flow, Geomechanics, and Formation Plugging With Application to High-Rate Produced Water Reinjection”, paper SPE 79695, SPE Reservoir Simulation Symposium, Houston, TX. Feb. 3-5, 2003 (R.C. Bachman, T.G. Harding, A. Settari and D.A. Walters)

 “The Modeling of the Effect of Water Blockage and Geomechanics in Waterfracs”, Paper SPE 77600, presented at the Annual Techn. Conf. of  SPE, San Antonio, TX., Sept. 29 – Oct. 2, 2002 (A. Settari, Sullivan, R.B., and Bachman, R.C).

“3-D Analysis and Prediction of Microseismicity in Fracturing by Coupled Geomechanical Modeling”, Paper SPE 75714, presented at the 2002 SPE Gas Technology Symposium held in Calgary, Alberta, Canada, 30 April–2 May 2002 (A. Settari, R. B. Sullivan, D. A. Walters, and P. A. Wawrzynek,).

“Hydraulic Fracture Growth through Offset Pressure-Monitoring Wells and Boreholes”, SPE 63031, presented at the 2000 SPE Annual Technical Conference, Dallas, TX, Oct. 1-4, 2000 (R. G. Jeffrey and A. Settari)

"Analysis of Hydraulic Fracturing of High Permeability Gas Wells to Reduce Non-Darcy Skin Effects ", paper CIM 98-71, 49th Annual Technical Meeting of Petrol. Soc. of CIM, Calgary, Alberta, June 8-10, 1998 (A. J. Stark, A.Settari and J. R. Jones)

"Productivity of Fractured Horizontal Wells", J. Can. Petrol. Technol., Vol. 37, No. 10, Oct. 1998, pp. 68-81 (F. Kuppe and A.Settari)

"A New 2-Dimensional Model for Acid Fracturing Design", Paper SPE 48930, Proceedings of the 1998 Annual Techn. Conf. of SPE, New Orleans, LA, Sept. 28-Oct. 1, 1998, pp. 39-53 (A.Settari , R.B. Sullivan and C.E. Hansen)

"An Instrumented Hydraulic Fracture Experiment in Coal", Paper SPE 39908, presented at the 1998 Rocky Mountain Regional/Low Permeability Reservoirs Symposium, Denver, CO, April 5-8, 1998 (R.G. Jeffrey and A.Settari)

"Brine Disposal into a Tight Stress Sensitive Formation at Fracturing Conditions: Design and Field Experience", SPE Reservoir Eval. & Eng., Vol 2, No. 2, April 1999, pp.186-195 (A.Settari, G.M. Warren, J. Jacquemont, P. Bieniawski and M. Dussaud)

"Stimulation for Methane Gas Recovery from Coal", Paper SPE 38345, presented at the 1997 Rocky Mountain Regional Meeting of SPE, Casper, Wyoming, May 1997 (R.G. Jeffrey, M.B. Wold, S.K. Choi and A.Settari)

"A Field Demonstration of Hydraulic Fracturing for Solids Waste Disposal -- Injection Pressure Analysis", Proceedings, 36th U.S. Rock Mechanics Symposium, New York, July 1997 (X. Weng and R.G. Keck and A.Settari)

"Productivity of Fractured Gas Condensate Wells: A Case Study of the Smorbukk Field", SPE Res. Eng., November 1996, pp.236-244 (A.Settari , R.C. Bachman, K.A. Hovem and S.G. Paulsen)

"Mini-frac Analysis of Shear Parting in Alberta Reservoirs and Its Impact Towards On-site Fracture Design", paper No. 96-79, 47th Annual Technical Meeting of Petrol. Soc. of CIM, Calgary, Alberta, June 10-12, 1996 (T. Leschyshyn and S.M. Farouq Ali and A.Settari)

"Estimation of Dilation from Fall-off Data in a Hydraulically Fractured McMurray Oil Sands Well", Paper No. 94-88, 45th Annual Technical Meeting of Petrol. Soc. of CIM, Calgary, Alberta, June 1994 (T. Leschyshyn, S.M. Farouq Ali, A.Settari and M.Y. Chan)

"A Comparison of Hydraulic Fracture Field Experiments, Including Mineback Geometry Data, with Numerical Fracture Model Simulations", paper SPE 30508, presented at the 1995 SPE Annual Tech. Conf. and Exhib., Dallas, Oct. 22-25, 1995 (R.G. Jeffrey, A.Settari and N.P. Smith)

"Practical Aspects of Pressure Induced Waterflooding", Paper 95-11, 46th Annual Technical Meeting of Petrol. Soc. of CIM, Banff, Alberta, 1995 (A.Settari and G. M. Warren)

"Post Frac Conductivity Calculation for Complex Reservoir/Fracture Geometry", SPE paper 28919, presented at the European Petroleum Conference, London, Oct., 1994 (A.Bale, M.B. Smith and A.Settari)

"Simulation and Field Analysis of Waterflood Induced Fracturing", Paper SPE 28081, Proceedings, SPE/ISRM Meeting "Rock Mechanics in Petroleum Engineering", Delft, Aug.29-31, 1994, pp. 435-445 (A. Settari and G. M. Warren).